I would like to access the mangOH green over SSH WITHOUT a USB cable attached to my laptop to access 192.168.2.2, how do I achieve this ? I know some of you must have achieved that, please share the steps.
Sure, you can SSH to teh mangOH grenn via the Ethernet connection (assuming you have plugged the cable into a switch and have a DHCP server running somewhere on your network).
But … the IP address *will not be
192.168.2.2 unless you manually configure the network on the 'Green.
You can also get a console via the serial port.
SSH access via the Ethernet port is disabled by default:
I’ve enabled SSH communication over the ethernet interface eth0, by changing my iptables.
I allowed communication over TCP port 22:
iptables -A INPUT -i eth0 -p tcp -m tcp --dport 22 -j ACCEPT
iptables-save > /etc/iptables/rules.v4
and can you now access your mangOH green over SSH ?
My mangOH Green board is connected to the company network via an ethernet cable, and gets an IP adres from the DHCP server.
I open an SSH session (via Putty) on port 22 of this IP address.
The target asks to login and enter my password:
So that’s a “YES”, then.
So you can mark the issue as SOLVED.