I’m running a mangOH Red with an HL7800 module. I’m attempting to download a new profile to an eUICC and something, possibly the the mangOH firmware, is resetting the SIM during the download. I get this from simtrace2:
Any ideas what could be causing this? As I understand it, the Red with a HL7800 is basically just a bit pipe - i.e. no fancy applications - and I have checked and things like power management (CPSMS) are disabled.
I have asked in another thread about firmware versions and I did notice that Legato RTOS and “Apps” are mentioned by ATI9, so I am wondering if there is a “fancy application” that is interfering here.
what do you mean by the mangoh firmware resetting the SIM during the download?
^^ The card state change reset above. I am trying to determine if 1) the eUICC is resetting itself or 2) something is resetting the eUICC
mangoh is a hardware board, it does not have firmware
Good point! I should have probably said that the HL7800 is resetting the eUICC - I am running the latest HL7800 firmware (4.6.9). Are there any applications running on the HL7800 that I should be aware of in this regard? i.e. applications that might reset the eUICC due to watchdogs or power management or something?