Send AT-command to mangOH Red


I’ve connected putty to the mangOH red USB console connector, baud rate 115200.
putty connects successfully but login/password are required.
Poky (Yocto Project Reference Distro) 1.7.3 swi-mdm9x15 /dev/ttyHSL1
swi-mdm9x15 login:

which login/password should I use?

Once login/password are correctly entred will I be able to send AT-commands to the WP?



Hello Gilles

login : root
no password is request

For AT command :

microcom -E /dev/ttyAT

to quit AT command use ‘ctrl+x’

I use teraterm and it work fine.



Thanks so much @Francis.duhaut, it’s working!!


ok Good news Gilles.