mangOH Red (WP7702) redSensorToCloud problem


#1

Hello,

I’m having a problem to start the app redSensorToCloud in my mangOH Red (WP7702). I followed all the steps in the Getting Started Guide, but we’re not using a GNSS antenna, we lost it.

I am not sure that is the problem, but here it go some possibilities:

When I initialize the app redSensorToCloud I get this issue, but I don’t know where to find the system log file:

There was an error. Application ‘redSensorToCloud’ could not be started. Check the system log for error messages.

When I retry to initialize redSensorToCloud I see that the application is already running.

I didn’t find a compatible firmware and application for WP7702. So I left that one for WP8548:

WP8548_SWI9X15Y_07.12.14.00

SWI9X15Y_07.12.14.00

When I try to connect, I get:

root@swi-mdm9x28-wp:~# cm data connect
Setting up profile 1
Connecting … ok
Cheking if device ‘rmnet_data0’ is up … ok
Routin inet … ok
mv: can’t remove ‘/etc/resolv.conf’: Device or resource busy
Testing connection … ok
root@swi-mdm9x28-wp:~#

The firmware version:

SWI9X06Y_02.16.06.00 7605a6 jenkins 2018/06/20 17:56:12

Bootloader Version:

SWI9X06Y_02.16.06.00 7605a6 jenkins 2018/06/20 17:56:12

Due this problem in the cm data connect I can not connect with AirVantage.

So, my doubts are:

  1. The problem with the connection could it be the by the absence of the GNSS Antenna?

  2. What could I do to resolve that without the antenna?

Any help would be greatly appreciated!