MangoH board running on battery


As i’m completely new to the MangoH Boards and its environment, Few Questions are here from my side to get clarity on as follows,

1.Does mangoH Red/Yellow can be run on a battery sand-alone, without using any SBC’s like Raspberry pi/Beagle Bone Black.

2.How shall i Flash,build and clean the image for MangoH boards? whether internal Flash/External SD card is present?


  1. as far as the battery can give correct voltage, then that is fine
  2. to flash image, you can see:

to build application:

Thanks for the Reply, will go through the links posted.