Error on OrangeStarterKit after using ADCs


#1

Hi,
I have an error after using ADCs pins and I don’t know why I get this

Dec  3 12:31:20 swi-mdm9x28-wp user.err kernel: [ 3452.336984] mci_protocol_frame_send: write frame fail to I2C: -2 of 18
Dec  3 12:31:20 swi-mdm9x28-wp user.info kernel: [ 3452.343219] swimcu_set_fault_mask: 0x1, cnt 9998
Dec  3 12:31:20 swi-mdm9x28-wp user.err kernel: [ 3452.343237] Failed to send request ca (-105)
Dec  3 12:31:20 swi-mdm9x28-wp user.err kernel: [ 3452.347358] swimcu_adc_init_and_start: fail chan 0
Dec  3 12:31:21 swi-mdm9x28-wp user.err kernel: [ 3452.353245] swimcu_read_adc: fail to init chan 0
Dec  3 12:31:21 swi-mdm9x28-wp user.err Legato: QCCI qmi_cci_xport_recv: txn not found. svc_id: 250
Dec  3 12:31:21 swi-mdm9x28-wp user.err Legato: =ERR= | modemDaemon[1394]/swiQmi T=main | swiQmi.c swiQmi_CheckResponse() 795 | Sending QMI_SWI_BSP_ADC_READ_REQ_V01 failed: rc=0 (), resp.result=1.[0x01], resp.error=8.[0x08]
Dec  3 12:31:21 swi-mdm9x28-wp user.err Legato: =ERR= | modemDaemon[1394]/le_pa T=main | pa_adc_qmi.c pa_adc_ReadValue() 195 | Failed to read ADC.2 (channel.6)
Dec  3 12:31:21 swi-mdm9x28-wp user.err kernel: [ 3452.460342] i2c-msm-v2 78b8000.i2c: ARB_LOST: msgs(n:1 cur:0 tx) bc(rx:0 tx:18) mode:FIFO slv_addr:0x3a MSTR_STS:0x081321d0 OPER:0x00000090
Dec  3 12:31:21 swi-mdm9x28-wp user.err kernel: [ 3452.474298] i2c-msm-v2 78b8000.i2c: ARB_LOST: msgs(n:1 cur:0 tx) bc(rx:0 tx:18) mode:FIFO slv_addr:0x3a MSTR_STS:0x081321d0 OPER:0x00000090
Dec  3 12:31:21 swi-mdm9x28-wp user.err kernel: [ 3452.489056] i2c-msm-v2 78b8000.i2c: ARB_LOST: msgs(n:1 cur:0 tx) bc(rx:0 tx:18) mode:FIFO slv_addr:0x3a MSTR_STS:0x081321d0 OPER:0x00000090
Dec  3 12:31:21 swi-mdm9x28-wp user.err kernel: [ 3452.504056] i2c-msm-v2 78b8000.i2c: ARB_LOST: msgs(n:1 cur:0 tx) bc(rx:0 tx:18) mode:FIFO slv_addr:0x3a MSTR_STS:0x081321d0 OPER:0x00000090
Dec  3 12:31:21 swi-mdm9x28-wp user.err kernel: [ 3452.519049] i2c-msm-v2 78b8000.i2c: ARB_LOST: msgs(n:1 cur:0 tx) bc(rx:0 tx:18) mode:FIFO slv_addr:0x3a MSTR_STS:0x081321d0 OPER:0x00000090
Dec  3 12:31:21 swi-mdm9x28-wp user.err kernel: [ 3452.534037] i2c-msm-v2 78b8000.i2c: ARB_LOST: msgs(n:1 cur:0 tx) bc(rx:0 tx:18) mode:FIFO slv_addr:0x3a MSTR_STS:0x081321d0 OPER:0x00000090

I can’t send datas to liveobject since I got this