Connect PCM in IOT#0? and disconnect Audio jack WP7607


#1

Hi
i am using WP7607
I can’t connect PCM to IOT#0.
I have already look at


I am looking for software solution.
From 4118903_mangOH_Green_(DV4)_Developers_Guide_r3.pdf
Table 2-5: GPIO Expander Signals
I have to master gpio - I/O_6 for PCM_ANALOG_SELECT , I/O_9 for PCM_EXP1_ENn, I/O_10 PCM_EXP1_SEL. ???

From AirPrime_WP76xx_Product_Technical_Specification_Rev6_2.pdf
Table 4-6: GPIO Pin Description
Which gpio should I use
I have tried gpios - 2,7,8,13,21,22,23,24,25,28,29,30,31,32,33,35,42
using at commads - AT+WIOCFG==,4,1,1,0,0
AT+WIOW==,
I do know the following connection
GPIO42 - Controls pin 24
GPIO13 - Controls pin 26
GPIO33 - Controls pin 25
GPIO8 - Controls pin 27

and gpios 36,37,38,40,41 using legato apps “streamMedia”.

I couldn’t disconnect the Audio jack or connect PCM (pins on extender 36,35,34,33).
I have also tried to active MuxControl from https://github.com/mangOH/MuxControl
I have got on ssh

Connecting to service …
Error: Can’t connect to muxCtrlService. Is it running?

cm info
Device: WP7607-1
IMEI: 359780080132123
IMEISV: 5
FSN: VP804370200810
Firmware Version: SWI9X07Y_02.18.05.00 000000 jenkins 2018/07/19 17:40:21
Bootloader Version: SWI9X07Y_02.18.05.00 000000 jenkins 2018/07/19 17:40:21
MCU Version: 002.009
PRI Part Number (PN): 9907364
PRI Revision: 001.004
Carrier PRI Name: SIERRA
Carrier PRI Revision: 001.002_000
SKU: 1103529
Last Reset Cause: Reset, User Requested
Resets Count: Expected: 418 Unexpected: 0