ANT CTL on MangOH board


#1

We are try to manage ANT CTL for Battery Exp, detect and Reset:
tis is from electronics scematics of mangOH board:

but this command gets error:
AT!ENTERCND=“A710”<\r>
<\r>

<\n>
OK<\r>

<\n>
AT!CUSTOM=“BANDSELEN”,1<\r>

<\r>

<\n>ERROR<\r>

<\n>
ATI9<\r>
<\r>

<\n>
Manufacturer: Sierra Wireless, Incorporated
<\r>

<\n>
Model: WP8548<\r>

<\n>
Revision: SWI9X15Y_07.11.11.00 r33161 CARMD-EV-FRMWR1 2016/09/20 16:36:44<\r>

<\n>
IMEI: 359377060030821<\r>

in accordance with datasheet for WP8548

could you please clarify how we can manage ANT_CTLx ?


#2

Hi,

Where did you get the document from? We dont use at!bandsel command.
Please use the document AirPrime WPx5xx AT Command Reference (ant!sel table 3-2) which you can download from source.sierrawireless.com.

regards,
ashish


#3

Hi Ashish,
thank you for your replay.
we tried AT!ANTSEL but modem answered Error:
<\n>Manufacturer: Sierra Wireless, Incorporated<\r>

<\n>Model: WP7502<\r>
<\n>Revision: SWI9X15Y_07.10.04.00 r32393 CARMD-EV-FRMWR1 2016/06/01 20:30:40<\r>

<\n>MEID: 35785107000184<\r>

<\n>ESN: 12803183992, 80309578<\r>

<\n>IMEI: 357851070001842<\r>

<\n>IMEI SV: 42<\r>

<\n>FSN: P3623200011403<\r>

<\n>+GCAP: +CGSM,+FCLASS,+DS<\r>

<\n><\r>
<\n>OK<\r>

<\n>AT!ANTSEL?<\r>
<\r>

<\n>ERROR<\r>

<\n>AT!ANTSEL=3,0,0,1<\r>
<\r>

<\n>ERROR<\r>

<\n>AT!ANTSEL?<\r>
<\r>

<\n>ERROR<\r>

If is possible could you please write example of command for manage GPIOs.

Regards, Kirill


#4

This seems like a password protected command.

I have googled and found the following page online:
http://whirlpool.net.au/wiki/sierra_advanced

There is a command on this page that shows:
AT!ENTERCND=“A710”

After I did this, I was able to get the at!antsel to work