All wifi commands failing with Mirage board


#12

root@swi-mdm9x15:~# /sbin/ifup wlan0
Error: Write failed
Error: Write failed
Error: Write failed
Error: Failed to read old value
Error: Failed to read old value
Failed to start TI wifi
root@swi-mdm9x15:~# vi /etc/init.d/tiwifi
root@swi-mdm9x15:~# dmesg -c
[ 67.369693] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1343c8, irq:187
[ 67.375339] qup_i2c qup_i2c.0: I2C slave addr:0x71 not connected
[ 67.403509] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1300c8, irq:187
[ 67.409949] qup_i2c qup_i2c.0: I2C slave addr:0x3e not connected
[ 67.422493] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1300c8, irq:187
[ 67.428841] qup_i2c qup_i2c.0: I2C slave addr:0x3e not connected
[ 67.441446] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1300c8, irq:187
[ 67.447642] qup_i2c qup_i2c.0: I2C slave addr:0x3e not connected
[ 67.460552] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1300c8, irq:187
[ 67.466198] qup_i2c qup_i2c.0: I2C slave addr:0x3e not connected
[ 67.475446] gpio_sync_ri: RI owner is Modem
[ 67.479566] ->gpio16 = 0
[ 67.479597] ->gpio17 = 0
[ 67.479597] ->gpio18 = 0
[ 67.479627] ->gpio19 = 0
[ 67.518937] mmc0: mci-version: 18
[ 67.527697] mmc0: bam physical base=0x12182000
[ 67.531115] mmc0: bam virtual base=0xd05d0000
[ 67.535449] sps:BAM 0x12182000 is registered.
[ 67.557179] mmc0: BAM device registered. bam_handle=0xcb948600<6>[ 67.562398] sps:REVISION of BAM 0xd05d0000 is 0x5.
[ 67.573538] mmc0: Qualcomm MSM SDCC-BAM at 0x0000000012182000 irq 130
[ 67.579673] mmc0: Qualcomm MSM SDCC-DML at 0x0000000012180800
[ 67.584770] mmc0: No card detect facilities available
[ 67.594567] mmc0: Qualcomm MSM SDCC-core at 0x0000000012180000 irq 136,0 dma -1 dmacrcri -1
[ 67.616175] mmc0: 8 bit data mode disabled
[ 67.619838] mmc0: 4 bit data mode enabled
[ 67.623256] mmc0: polling status mode disabled
[ 67.633541] mmc0: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
[ 67.655669] mmc0: Slot eject status = 0
[ 67.669342] mmc0: Power save feature enable = 1
[ 67.688844] mmc0: SPS-BAM data transfer mode available
[ 67.775766] Loading modules backported from Linux version R8.5
[ 67.787791] Backport generated by backports.git R8.5
[ 67.927971] cfg80211: Calling CRDA to update world regulatory domain
[ 68.482710] cfg80211: World regulatory domain updated:
[ 68.486860] cfg80211: DFS Master region: unset
[ 68.517289] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 68.526018] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 68.540485] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 68.547993] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 68.555470] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 68.565359] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 68.574759] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 68.582725] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 68.590752] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)


#13

how are you powering the board? Through a computer or through a USB to wall adapter?


#14

I am powering the Mangoh Red with a computer USB cable


#15

Could you change that? I am wondering if the power from your computer is not enough to support cellular + WiFi simultaneously


#16

Ok adjusted the mangoh to receive power from a wall socket usb and I’m sshing using the other port, and I receive the same error


#17

Here is the setup in case you’re wondering. When i set the required fields for wifi_ap, I still receive the -6 error and logread outputs the same. But dmesg -c doesnt show anything…:

root@swi-mdm9x15:~# /sbin/ifup wlan0
Failed to start TI wifi
root@swi-mdm9x15:~# dmesg -c
root@swi-mdm9x15:~#


#18

Seems like the driver did load for you.
Does the client mode work for you? We’ll try the AP mode tomorrow to test.


#19

@rauger did you use the tiwifi script i sent to you? looks like your tiwifi script is still failing - i will try to send to you in a message again


#20

@rauger tried again and here is my outputs:

root@swi-mdm9x15:~# /sbin/ifup wlan0
root@swi-mdm9x15:~# dmesg -c
[ 65.227804] gpio_sync_ri: RI owner is Modem
[ 65.231008] ->gpio16 = 0
[ 65.231008] ->gpio17 = 0
[ 65.231039] ->gpio18 = 0
[ 65.231039] ->gpio19 = 0
[ 65.233236] gpio_sync_ri: RI owner is Modem
[ 65.236441] ->gpio16 = 0
[ 65.236471] ->gpio17 = 0
[ 65.236502] ->gpio18 = 0
[ 65.236502] ->gpio19 = 0
[ 65.248557] gpio_sync_ri: RI owner is Modem
[ 65.251762] ->gpio16 = 0
[ 65.251762] ->gpio17 = 0
[ 65.251793] ->gpio18 = 0
[ 65.251793] ->gpio19 = 0
[ 65.318480] mmc0: mci-version: 18
[ 65.337189] mmc0: bam physical base=0x12182000
[ 65.340637] mmc0: bam virtual base=0xd05bc000
[ 65.345002] sps:BAM 0x12182000 is registered.
[ 65.366732] mmc0: BAM device registered. bam_handle=0xceb33600<6>[ 65.371921] sps:REVISION of BAM 0xd05bc000 is 0x5.
[ 65.383488] mmc0: Qualcomm MSM SDCC-BAM at 0x0000000012182000 irq 130
[ 65.389470] mmc0: Qualcomm MSM SDCC-DML at 0x0000000012180800
[ 65.394719] mmc0: No card detect facilities available
[ 65.404455] mmc0: Qualcomm MSM SDCC-core at 0x0000000012180000 irq 136,0 dma -1 dmacrcri -1
[ 65.426186] mmc0: 8 bit data mode disabled
[ 65.429848] mmc0: 4 bit data mode enabled
[ 65.433267] mmc0: polling status mode disabled
[ 65.443674] mmc0: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
[ 65.465588] mmc0: Slot eject status = 0
[ 65.468670] mmc0: card claims to support voltages below the defined range. These will be ignored.
[ 65.486769] mmc0: Power save feature enable = 1
[ 65.490279] mmc0: SPS-BAM data transfer mode available
[ 65.589317] Loading modules backported from Linux version R8.5
[ 65.594140] Backport generated by backports.git R8.5
[ 65.642118] mmc0: queuing unknown CIS tuple 0x91 (3 bytes)
[ 65.720585] mmc0: new high speed SDIO card at address 0001
[ 65.877552] cfg80211: Calling CRDA to update world regulatory domain
[ 66.444712] cfg80211: World regulatory domain updated:
[ 66.470105] cfg80211: DFS Master region: unset
[ 66.473462] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 66.510636] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 66.535479] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 66.543171] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 66.550801] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 66.560323] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 66.569662] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 66.577689] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 66.585441] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 66.740637] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11)
[ 66.830672] wlcore: loaded
[ 66.832443] wlcore: driver version: ol_r8.a9.14
[ 66.886708] wlcore: compilation time: Thu Apr 27 02:16:58 2017
[ 72.367190] wlcore: PHY firmware version: Rev 8.2.0.0.224
[ 72.669006] wlcore: firmware booted (Rev 8.9.0.0.31)
[ 72.951442] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
root@swi-mdm9x15:~#
root@swi-mdm9x15:~# legato version
16.10.3_7776bb75a488e0db67b0d24975b46dd0


#21

@rauger in addition tried the wifi ap commands shown below - although FYI when i set up an AP i usually use the web application. This involves starting the wifiWebAp legato application and then I use a web browser with the url 192.168.2.2:8080.

root@swi-mdm9x15:~# wifi ap setssid "RAUGER1"
SSID set successfully.
root@swi-mdm9x15:~# wifi ap start
starting…
root@swi-mdm9x15:~# wifi ap setssid "RAUGER1"
SSID set successfully.
root@swi-mdm9x15:~# wifi ap setchannel 1
Channel set to 1.
root@swi-mdm9x15:~# wifi ap setsecurityproto 1
Security protocol set to 1.
root@swi-mdm9x15:~# wifi ap setpassphrase "SIERRA_WIFI"
Passphrase set.
root@swi-mdm9x15:~# wifi ap setdiscoverable 1
Discoverable set to 1.
root@swi-mdm9x15:~# wifi ap setmaxclients 5
Max number of clients set to 5.
root@swi-mdm9x15:~# wifi ap start
starting…
root@swi-mdm9x15:~# ifconfig wlan0
wlan0 Link encap:Ethernet HWaddr 80:30:DC:05:4A:10
inet6 addr: fe80::8230:dcff:fe05:4a10/64 Scope:Link
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:792 (792.0 B)


WiFi on mangoOH Red
#22

I re-tried the tiwifi script you sent me on a wp85 and wp 75 on the mangoh red with the same result.
I tried the commands you suggest:

root@swi-mdm9x15:~# wifi ap setssid "RAUGER1"
SSID set successfully.
root@swi-mdm9x15:~# wifi ap start
ERROR:le_wifiAp_Start returns -6.

logread WP85:

Feb 15 16:25:53 swi-mdm9x15 user.info Legato: INFO | wifiService[567]/daemon T=main | pa_wifi_ap_ti.c pa_wifiAp_SetSsid() 750 | SSID length 7 | SSID: "RAUGER1"
Feb 15 16:25:53 swi-mdm9x15 user.debug Legato: DBUG | wifiService[567]/framework T=main | le_wifiAp_server.c Handle_le_wifiAp_SetSsid() 645 | Sending response to client session 0x27cac : 4 bytes sent
Feb 15 16:25:53 swi-mdm9x15 user.debug Legato: DBUG | wifiService[567]/daemon T=main | le_wifiClient.c CloseSessionEventHandler() 414 | sessionRef 0x27d3c GetFirstSessionRef (nil)
Feb 15 16:25:53 swi-mdm9x15 user.debug Legato: DBUG | wifiService[567]/framework T=main | le_wifiClient_server.c CleanupClientData() 195 | Client 0x27d3c is closed !!!
Feb 15 16:25:53 swi-mdm9x15 user.debug Legato: DBUG | wifiService[567]/framework T=main | le_wifiAp_server.c CleanupClientData() 195 | Client 0x27cac is closed !!!
Feb 15 16:25:56 swi-mdm9x15 user.debug Legato: DBUG | wifiService[567]/framework T=main | LE_FILENAME ExtractFileDescriptor() 33 | Received fd (10).
Feb 15 16:25:56 swi-mdm9x15 user.debug Legato: DBUG | wifiService[567]/framework T=main | LE_FILENAME ExtractFileDescriptor() 33 | Received fd (11).
Feb 15 16:25:56 swi-mdm9x15 user.info Legato: INFO | wifiService[567]/daemon T=main | pa_wifi_ap_ti.c pa_wifiAp_Start() 449 | AP starts
Feb 15 16:25:56 swi-mdm9x15 user.debug Legato: DBUG | wifiService[567]/framework T=main | LE_FILENAME le_mem_ForceAlloc() 841 | Memory pool ‘framework.DestructorObjs’ overflowed. Expanded to 2 blocks.
Feb 15 16:25:56 swi-mdm9x15 user.info Legato: INFO | wifiService[567]/daemon T=main | pa_wifi_ap_ti.c pa_wifiAp_Start() 463 | SSID = RAUGER1
Feb 15 16:25:56 swi-mdm9x15 user.debug Legato: DBUG | wifiService[567]/framework T=WifiApPaThread | LE_FILENAME PThreadStartRoutine() 362 | Set nice level to 0.
Feb 15 16:25:56 swi-mdm9x15 user.debug Legato: DBUG | wifiService[567]/framework T=WifiApPaThread | LE_FILENAME le_mem_ForceAlloc() 841 | Memory pool ‘framework.DestructorObjs’ overflowed. Expanded to 3 blocks.
Feb 15 16:25:56 swi-mdm9x15 user.info Legato: INFO | wifiService[567]/daemon T=WifiApPaThread | pa_wifi_ap_ti.c WifiApPaThreadMain() 230 | Started!
Feb 15 16:25:56 swi-mdm9x15 user.info Legato: INFO | wifiService[567] | WIFI_START
Feb 15 16:25:56 swi-mdm9x15 user.info Legato: INFO | wifiService[567]/daemon T=WifiApPaThread | pa_wifi_ap_ti.c WifiApPaThreadMain() 247 | PARSING:WIFI_SET_EVENT : len:15
Feb 15 16:25:56 swi-mdm9x15 user.info kernel: [ 283.776010] Loading modules backported from Linux version R8.5
Feb 15 16:25:56 swi-mdm9x15 user.info kernel: [ 283.801861] Backport generated by backports.git R8.5
Feb 15 16:25:56 swi-mdm9x15 user.err kernel: [ 283.949549] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1343c8, irq:187
Feb 15 16:25:56 swi-mdm9x15 user.err kernel: [ 283.955196] qup_i2c qup_i2c.0: I2C slave addr:0x71 not connected
Feb 15 16:25:56 swi-mdm9x15 user.err Legato: =ERR= | wifiService[567] | Error: Write failed
Feb 15 16:25:57 swi-mdm9x15 user.err kernel: [ 283.998901] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1343c8, irq:187
Feb 15 16:25:57 swi-mdm9x15 user.err kernel: [ 284.004578] qup_i2c qup_i2c.0: I2C slave addr:0x3e not connected
Feb 15 16:25:57 swi-mdm9x15 user.err Legato: =ERR= | wifiService[567] | Error: Write failed
Feb 15 16:25:57 swi-mdm9x15 user.err kernel: [ 284.039066] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1343c8, irq:187
Feb 15 16:25:57 swi-mdm9x15 user.err kernel: [ 284.044742] qup_i2c qup_i2c.0: I2C slave addr:0x3e not connected
Feb 15 16:25:57 swi-mdm9x15 user.err Legato: =ERR= | wifiService[567] | Error: Write failed
Feb 15 16:25:57 swi-mdm9x15 user.err kernel: [ 284.078956] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1343c8, irq:187
Feb 15 16:25:57 swi-mdm9x15 user.err kernel: [ 284.084602] qup_i2c qup_i2c.0: I2C slave addr:0x3e not connected
Feb 15 16:25:57 swi-mdm9x15 user.err Legato: =ERR= | wifiService[567] | Error: Failed to read old value
Feb 15 16:25:57 swi-mdm9x15 user.info kernel: [ 284.097176] cfg80211: Calling CRDA to update world regulatory domain
Feb 15 16:25:57 swi-mdm9x15 user.err kernel: [ 284.132244] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1343c8, irq:187
Feb 15 16:25:57 swi-mdm9x15 user.err Legato: =ERR= | wifiService[567] | Error: Failed to read old value
Feb 15 16:25:57 swi-mdm9x15 user.err kernel: [ 284.138654] qup_i2c qup_i2c.0: I2C slave addr:0x3e not connected
Feb 15 16:25:57 swi-mdm9x15 user.info kernel: [ 284.186937] gpio_sync_ri: RI owner is Modem
Feb 15 16:25:57 swi-mdm9x15 user.debug kernel: [ 284.190141] ->gpio16 = 0
Feb 15 16:25:57 swi-mdm9x15 user.debug kernel: [ 284.190141] ->gpio17 = 0
Feb 15 16:25:57 swi-mdm9x15 user.debug kernel: [ 284.190172] ->gpio18 = 0
Feb 15 16:25:57 swi-mdm9x15 user.debug kernel: [ 284.190172] ->gpio19 = 0
Feb 15 16:25:57 swi-mdm9x15 user.info kernel: [ 284.269372] mmc0: mci-version: 18
Feb 15 16:25:57 swi-mdm9x15 user.info kernel: [ 284.292720] mmc0: bam physical base=0x12182000
Feb 15 16:25:57 swi-mdm9x15 user.info kernel: [ 284.296169] mmc0: bam virtual base=0xd0664000
Feb 15 16:25:57 swi-mdm9x15 user.info kernel: [ 284.336853] sps:BAM 0x12182000 is registered.
Feb 15 16:25:57 swi-mdm9x15 user.info kernel: [ 284.340027] mmc0: BAM device registered. bam_handle=0xce63d400<6>[ 284.352235] sps:REVISION of BAM 0xd0664000 is 0x5.
Feb 15 16:25:57 swi-mdm9x15 user.info kernel: [ 284.367068] mmc0: Qualcomm MSM SDCC-BAM at 0x0000000012182000 irq 130
Feb 15 16:25:57 swi-mdm9x15 user.info kernel: [ 284.372531] mmc0: Qualcomm MSM SDCC-DML at 0x0000000012180800
Feb 15 16:25:57 swi-mdm9x15 user.err kernel: [ 284.383732] mmc0: No card detect facilities available
Feb 15 16:25:57 swi-mdm9x15 user.info kernel: [ 284.399267] mmc0: Qualcomm MSM SDCC-core at 0x0000000012180000 irq 136,0 dma -1 dmacrcri -1
Feb 15 16:25:57 swi-mdm9x15 user.info kernel: [ 284.425698] mmc0: 8 bit data mode disabled
Feb 15 16:25:57 swi-mdm9x15 user.info kernel: [ 284.431771] mmc0: 4 bit data mode enabled
Feb 15 16:25:57 swi-mdm9x15 user.info kernel: [ 284.454753] mmc0: polling status mode disabled
Feb 15 16:25:57 swi-mdm9x15 user.info kernel: [ 284.474500] mmc0: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
Feb 15 16:25:57 swi-mdm9x15 user.info kernel: [ 284.495223] mmc0: Slot eject status = 0
Feb 15 16:25:57 swi-mdm9x15 user.info kernel: [ 284.514481] mmc0: Power save feature enable = 1
Feb 15 16:25:57 swi-mdm9x15 user.info kernel: [ 284.521928] mmc0: SPS-BAM data transfer mode available
Feb 15 16:25:57 swi-mdm9x15 user.info kernel: [ 284.770791] cfg80211: World regulatory domain updated:
Feb 15 16:25:57 swi-mdm9x15 user.info kernel: [ 284.774942] cfg80211: DFS Master region: unset
Feb 15 16:25:57 swi-mdm9x15 user.info kernel: [ 284.785167] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Feb 15 16:25:57 swi-mdm9x15 user.info kernel: [ 284.816389] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Feb 15 16:25:57 swi-mdm9x15 user.info kernel: [ 284.823378] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Feb 15 16:25:57 swi-mdm9x15 user.info kernel: [ 284.844468] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
Feb 15 16:25:57 swi-mdm9x15 user.info kernel: [ 284.852098] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
Feb 15 16:25:57 swi-mdm9x15 user.info kernel: [ 284.861223] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
Feb 15 16:25:57 swi-mdm9x15 user.info kernel: [ 284.870746] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
Feb 15 16:25:57 swi-mdm9x15 user.info kernel: [ 284.878681] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Feb 15 16:25:57 swi-mdm9x15 user.info Legato: INFO | wifiService[567]/daemon T=WifiApPaThread | pa_wifi_ap_ti.c WifiApPaThreadMain() 247 | PARSING:phy #0: regulatory domain change: set to world roaming by the wireless core upon initialization request : len:104
Feb 15 16:25:57 swi-mdm9x15 user.info kernel: [ 284.886677] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
Feb 15 16:26:03 swi-mdm9x15 user.info Legato: INFO | wifiService[567] | Failed to start TI wifi
Feb 15 16:26:03 swi-mdm9x15 user.err Legato: =ERR= | wifiService[567]/daemon T=main | pa_wifi_ap_ti.c pa_wifiAp_Start() 484 | WiFi Access Point Command Failed: (23296)wlan0 WIFI_START
Feb 15 16:26:03 swi-mdm9x15 user.err Legato: =ERR= | wifiService[567]/daemon T=main | pa_wifi_ap_ti.c pa_wifiAp_Start() 614 | WiFi Client Command Failed: As a result, configuration file (/tmp/hostapd.conf) is removed.
Feb 15 16:26:03 swi-mdm9x15 user.debug Legato: DBUG | wifiService[567]/framework T=main | le_wifiAp_server.c Handle_le_wifiAp_Start() 557 | Sending response to client session 0x27d3c : 4 bytes sent
Feb 15 16:26:03 swi-mdm9x15 user.debug Legato: DBUG | wifiService[567]/daemon T=main | le_wifiClient.c CloseSessionEventHandler() 414 | sessionRef 0x27cac GetFirstSessionRef (nil)
Feb 15 16:26:03 swi-mdm9x15 user.debug Legato: DBUG | wifiService[567]/framework T=main | le_wifiClient_server.c CleanupClientData() 195 | Client 0x27cac is closed !!!
Feb 15 16:26:03 swi-mdm9x15 user.debug Legato: DBUG | wifiService[567]/framework T=main | le_wifiAp_server.c CleanupClientData() 195 | Client 0x27d3c is closed !!!

Now, here is something weird. When attempting wifiWebAp, we get a similar error and then a ton of messages "Reaping unconfigured child process xxxx"
logread:

app start wifiWebAp

Feb 15 16:35:34 swi-mdm9x15 user.info Legato: INFO | supervisor[468]/supervisor T=main | resourceLimits.c SetRLimitValue() 282 | Setting resource limit maxCoreDumpFileBytes to value 102400.
Feb 15 16:35:34 swi-mdm9x15 user.info Legato: INFO | supervisor[468]/supervisor T=main | resourceLimits.c SetRLimitValue() 282 | Setting resource limit maxFileBytes to value 102400.
Feb 15 16:35:34 swi-mdm9x15 user.info Legato: INFO | supervisor[468]/supervisor T=main | resourceLimits.c SetRLimitValue() 282 | Setting resource limit maxLockedMemoryBytes to value 8192.
Feb 15 16:35:34 swi-mdm9x15 user.info Legato: INFO | supervisor[468]/supervisor T=main | resourceLimits.c SetRLimitValue() 282 | Setting resource limit maxFileDescriptors to value 256.
Feb 15 16:35:34 swi-mdm9x15 user.info Legato: INFO | supervisor[468]/supervisor T=main | resourceLimits.c SetRLimitValue() 282 | Setting resource limit maxMQueueBytes to value 512.
Feb 15 16:35:34 swi-mdm9x15 user.info Legato: INFO | supervisor[468]/supervisor T=main | resourceLimits.c SetRLimitValue() 282 | Setting resource limit maxThreads to value 20.
Feb 15 16:35:34 swi-mdm9x15 user.info Legato: INFO | supervisor[468]/supervisor T=main | resourceLimits.c SetRLimitValue() 282 | Setting resource limit maxQueuedSignals to value 100.
Feb 15 16:35:34 swi-mdm9x15 user.info Legato: INFO | supervisor[468]/supervisor T=main | proc.c proc_Start() 1190 | Starting process ‘wifiWebAp’ with pid 1740
Feb 15 16:35:34 swi-mdm9x15 user.info Legato: INFO | supervisor[1740]/supervisor T=main | proc.c proc_Start() 1155 | Execing 'wifiWebAp’
Feb 15 16:35:34 swi-mdm9x15 user.debug Legato: DBUG | UNKNOWN[1740]/framework T=unknown | LE_FILENAME InitPool() 303 | Memory pool name ‘framework.hashMap_refPathIteratorMap’ is truncated to 'framework.hashMap_refPathIterat’
Feb 15 16:35:34 swi-mdm9x15 user.debug Legato: DBUG | UNKNOWN[1740]/framework T=main | LE_FILENAME InitPool() 303 | Memory pool name ‘framework.hashMap_refEventHandlers’ is truncated to 'framework.hashMap_refEventHandl’
Feb 15 16:35:34 swi-mdm9x15 user.debug Legato: DBUG | UNKNOWN[1740]/framework T=main | LE_FILENAME InitPool() 303 | Memory pool name ‘framework.hashMap_refDefault Timer SafeRe’ is truncated to 'framework.hashMap_refDefault Ti’
Feb 15 16:35:34 swi-mdm9x15 user.debug Legato: DBUG | UNKNOWN[1740]/framework T=main | LE_FILENAME InitPool() 303 | Memory pool name ‘framework.MessagingClientInterfaces’ is truncated to 'framework.MessagingClientInterf’
Feb 15 16:35:34 swi-mdm9x15 user.debug Legato: DBUG | UNKNOWN[1740]/framework T=main | LE_FILENAME InitPool() 303 | Memory pool name ‘framework.hashMap_refHandlersRef’ is truncated to 'framework.hashMap_refHandlersRe’
Feb 15 16:35:34 swi-mdm9x15 user.debug Legato: DBUG | UNKNOWN[1740]/framework T=main | LE_FILENAME InitPool() 303 | Memory pool name ‘framework.hashMap_MessagingServices’ is truncated to 'framework.hashMap_MessagingServ’
Feb 15 16:35:34 swi-mdm9x15 user.debug Legato: DBUG | UNKNOWN[1740]/framework T=main | LE_FILENAME InitPool() 303 | Memory pool name ‘framework.hashMap_MessagingClients’ is truncated to 'framework.hashMap_MessagingClie’
Feb 15 16:35:34 swi-mdm9x15 user.debug Legato: DBUG | UNKNOWN[1740]/framework T=main | LE_FILENAME InitPool() 303 | Memory pool name ‘framework.PipelineSIGCHLD-reports’ is truncated to 'framework.PipelineSIGCHLD-repor’
Feb 15 16:35:34 swi-mdm9x15 user.debug Legato: DBUG | UNKNOWN[1740]/framework T=main | LE_FILENAME le_mem_ForceAlloc() 841 | Memory pool ‘framework.DestructorObjs’ overflowed. Expanded to 1 blocks.
Feb 15 16:35:34 swi-mdm9x15 user.debug Legato: DBUG | UNKNOWN[1740]/ T=main | _componentMain.c wifiWebApComponent_Init() 29 | Initializing wifiWebApComponent component library.
Feb 15 16:35:34 swi-mdm9x15 user.debug Legato: DBUG | UNKNOWN[1740]/framework T=main | LE_FILENAME InitPool() 303 | Memory pool name ‘framework.hashMap_refle_wifiAp_ClientHand’ is truncated to 'framework.hashMap_refle_wifiAp

Feb 15 16:35:34 swi-mdm9x15 user.debug Legato: DBUG | UNKNOWN[1740]/framework T=main | LE_FILENAME msgMessage_CreatePool() 112 | Pool name truncated to ‘msgs-fe7eae3148cce5e653b977d35e’ for protocol ‘fe7eae3148cce5e653b977d35eda3dd9’.
Feb 15 16:35:34 swi-mdm9x15 user.debug Legato: DBUG | UNKNOWN[1740]/framework T=main | LE_FILENAME InitPool() 303 | Memory pool name ‘framework.msgs-fe7eae3148cce5e653b977d35e’ is truncated to 'framework.msgs-fe7eae3148cce5e6’
Feb 15 16:35:34 swi-mdm9x15 user.debug Legato: DBUG | wifiService[544]/framework T=main | LE_FILENAME ExtractFileDescriptor() 33 | Received fd (10).
Feb 15 16:35:34 swi-mdm9x15 user.warn Legato: -WRN- | UNKNOWN[1740]/framework T=main | LE_FILENAME le_fdMonitor_Create() 672 | FD Monitor object name ‘wifiWebAp.wifiWebApComponent.le_wifiAp’ truncated to ‘wifiWebAp.wifiWebApComponent.le’.
Feb 15 16:35:34 swi-mdm9x15 user.debug Legato: DBUG | UNKNOWN[1740]/framework T=main | LE_FILENAME le_mem_ForceAlloc() 841 | Memory pool ‘.le_wifiAp_ClientThreadData’ overflowed. Expanded to 1 blocks.
Feb 15 16:35:34 swi-mdm9x15 user.debug Legato: DBUG | UNKNOWN[1740]/framework T=main | le_wifiAp_client.c DoConnectService() 391 | ======= Starting client for ‘wifiWebAp.wifiWebApComponent.le_wifiAp’ service ========
Feb 15 16:35:34 swi-mdm9x15 user.debug Legato: DBUG | wifiWebAp[1740]/framework T=main | LE_FILENAME InitPool() 303 | Memory pool name ‘framework.msgs-LogControlProtocol’ is truncated to 'framework.msgs-LogControlProtoc’
Feb 15 16:35:34 swi-mdm9x15 user.debug Legato: DBUG | wifiWebAp[1740]/wifiWebAp_exe T=main | _main.c main() 56 | == Starting Event Processing Loop ==
Feb 15 16:35:34 swi-mdm9x15 user.info Legato: INFO | wifiWebAp[1740]/wifiWebApComponent T=main | wifiWebAp.c _wifiWebApComponent_COMPONENT_INIT() 313 | ======== WiFi Web Ap ======== on port 8080
Feb 15 16:35:34 swi-mdm9x15 user.info Legato: INFO | wifiWebAp[1740]/wifiWebApComponent T=main | wifiWebAp.c SubscribeApEvents() 171 | SubscribeApEvents
Feb 15 16:35:34 swi-mdm9x15 user.debug Legato: DBUG | wifiWebAp[1740]/framework T=main | LE_FILENAME le_mem_ForceAlloc() 841 | Memory pool ‘.le_wifiAp_ClientData’ overflowed. Expanded to 1 blocks.
Feb 15 16:35:34 swi-mdm9x15 user.debug Legato: DBUG | wifiWebAp[1740]/framework T=main | le_wifiAp_client.c le_wifiAp_AddNewEventHandler() 612 | Sending message to server and waiting for response : 4 bytes sent
Feb 15 16:35:34 swi-mdm9x15 user.debug Legato: DBUG | wifiService[544]/framework T=main | LE_FILENAME le_mem_ForceAlloc() 841 | Memory pool ‘.le_wifiAp_ServerData’ overflowed. Expanded to 1 blocks.
Feb 15 16:35:34 swi-mdm9x15 user.debug Legato: DBUG | wifiService[544]/daemon T=main | le_wifiAp.c le_wifiAp_AddNewEventHandler() 89 | Add new event handler
Feb 15 16:35:34 swi-mdm9x15 user.debug Legato: DBUG | wifiService[544]/framework T=main | le_wifiAp_server.c Handle_le_wifiAp_AddNewEventHandler() 461 | Sending response to client session 0x27d3c : 4 bytes sent
Feb 15 16:35:34 swi-mdm9x15 user.info Legato: INFO | wifiWebAp[1740]/wifiWebApComponent T=main | wifiWebAp.c StartWebServer() 194 | popen : /usr/sbin/httpd -v -p 8080 -u root -h /legato/systems/current/apps/wifiWebAp/read-only/var/www/ 2>&1
Feb 15 16:35:34 swi-mdm9x15 user.info Legato: INFO | wifiWebAp[1740]/wifiWebApComponent T=main | wifiWebAp.c StartWebServer() 196 | AFTER (command did not hang) 0x2e470
Feb 15 16:35:34 swi-mdm9x15 user.info Legato: INFO | wifiWebAp[1740]/wifiWebApComponent T=main | wifiWebAp.c StartWebServer() 227 | STARTING WIFI HTTP INTERFACE
Feb 15 16:35:42 swi-mdm9x15 user.debug Legato: DBUG | UNKNOWN[1765]/framework T=unknown | LE_FILENAME InitPool() 303 | Memory pool name ‘framework.hashMap_refPathIteratorMap’ is truncated to 'framework.hashMap_refPathIterat’
Feb 15 16:35:42 swi-mdm9x15 user.debug Legato: DBUG | UNKNOWN[1765]/framework T=main | LE_FILENAME InitPool() 303 | Memory pool name ‘framework.hashMap_refEventHandlers’ is truncated to 'framework.hashMap_refEventHandl’
Feb 15 16:35:42 swi-mdm9x15 user.debug Legato: DBUG | UNKNOWN[1765]/framework T=main | LE_FILENAME InitPool() 303 | Memory pool name ‘framework.hashMap_refDefault Timer SafeRe’ is truncated to 'framework.hashMap_refDefault Ti’
Feb 15 16:35:42 swi-mdm9x15 user.debug Legato: DBUG | UNKNOWN[1765]/framework T=main | LE_FILENAME InitPool() 303 | Memory pool name ‘framework.MessagingClientInterfaces’ is truncated to 'framework.MessagingClientInterf’
Feb 15 16:35:42 swi-mdm9x15 user.debug Legato: DBUG | UNKNOWN[1765]/framework T=main | LE_FILENAME InitPool() 303 | Memory pool name ‘framework.hashMap_refHandlersRef’ is truncated to 'framework.hashMap_refHandlersRe’
Feb 15 16:35:42 swi-mdm9x15 user.debug Legato: DBUG | UNKNOWN[1765]/framework T=main | LE_FILENAME InitPool() 303 | Memory pool name ‘framework.hashMap_MessagingServices’ is truncated to 'framework.hashMap_MessagingServ’
Feb 15 16:35:42 swi-mdm9x15 user.debug Legato: DBUG | UNKNOWN[1765]/framework T=main | LE_FILENAME InitPool() 303 | Memory pool name ‘framework.hashMap_MessagingClients’ is truncated to 'framework.hashMap_MessagingClie’
Feb 15 16:35:42 swi-mdm9x15 user.debug Legato: DBUG | UNKNOWN[1765]/framework T=main | LE_FILENAME InitPool() 303 | Memory pool name ‘framework.PipelineSIGCHLD-reports’ is truncated to 'framework.PipelineSIGCHLD-repor’
Feb 15 16:35:42 swi-mdm9x15 user.debug Legato: DBUG | UNKNOWN[1765]/framework T=main | LE_FILENAME le_mem_ForceAlloc() 841 | Memory pool ‘framework.DestructorObjs’ overflowed. Expanded to 1 blocks.
Feb 15 16:35:42 swi-mdm9x15 user.debug Legato: DBUG | UNKNOWN[1765]/ T=main | _componentMain.c _cm_Init() 62 | Initializing cm component library.
Feb 15 16:35:42 swi-mdm9x15 user.debug Legato: DBUG | UNKNOWN[1765]/framework T=main | LE_FILENAME InitPool() 303 | Memory pool name ‘framework.hashMap_refle_cfg_ClientHandler’ is truncated to 'framework.hashMap_refle_cfg_Cli’
Feb 15 16:35:42 swi-mdm9x15 user.debug Legato: DBUG | UNKNOWN[1765]/framework T=main | LE_FILENAME msgMessage_CreatePool() 112 | Pool name truncated to ‘msgs-8a26e6c5c2c76df02e412df515’ for protocol ‘8a26e6c5c2c76df02e412df515bd9f71’.
Feb 15 16:35:42 swi-mdm9x15 user.debug Legato: DBUG | UNKNOWN[1765]/framework T=main | LE_FILENAME InitPool() 303 | Memory pool name ‘framework.msgs-8a26e6c5c2c76df02e412df515’ is truncated to 'framework.msgs-8a26e6c5c2c76df0’
Feb 15 16:35:42 swi-mdm9x15 user.debug Legato: DBUG | UNKNOWN[1765]/framework T=main | LE_FILENAME le_mem_ForceAlloc() 841 | Memory pool ‘.le_cfg_ClientThreadData’ overflowed. Expanded to 1 blocks.
Feb 15 16:35:42 swi-mdm9x15 user.debug Legato: DBUG | UNKNOWN[1765]/framework T=main | le_cfg_client.c DoConnectService() 391 | ======= Starting client for ‘cm.cm.le_cfg’ service ========
Feb 15 16:35:42 swi-mdm9x15 user.debug Legato: DBUG | UNKNOWN[1765]/framework T=main | LE_FILENAME InitPool() 303 | Memory pool name ‘framework.hashMap_refle_mrc_ClientHandler’ is truncated to 'framework.hashMap_refle_mrc_Cli’
Feb 15 16:35:42 swi-mdm9x15 user.debug Legato: DBUG | UNKNOWN[1765]/framework T=main | LE_FILENAME msgMessage_CreatePool() 112 | Pool name truncated to ‘msgs-74bd62afd4fc83a23e68a6e723’ for protocol ‘74bd62afd4fc83a23e68a6e7230749f7’.
Feb 15 16:35:42 swi-mdm9x15 user.debug Legato: DBUG | UNKNOWN[1765]/framework T=main | LE_FILENAME InitPool() 303 | Memory pool name ‘framework.msgs-74bd62afd4fc83a23e68a6e723’ is truncated to 'framework.msgs-74bd62afd4fc83a2’
Feb 15 16:35:42 swi-mdm9x15 user.debug Legato: DBUG | UNKNOWN[1765]/framework T=main | LE_FILENAME le_mem_ForceAlloc() 841 | Memory pool ‘.le_mrc_ClientThreadData’ overflowed. Expanded to 1 blocks.
Feb 15 16:35:42 swi-mdm9x15 user.debug Legato: DBUG | UNKNOWN[1765]/framework T=main | le_mrc_client.c DoConnectService() 391 | ======= Starting client for ‘cm.cm.le_mrc’ service ========
Feb 15 16:35:42 swi-mdm9x15 user.debug Legato: DBUG | UNKNOWN[1765]/framework T=main | LE_FILENAME le_mem_ForceAlloc() 841 | Memory pool ‘framework.SafeRef-Map’ overflowed. Expanded to 11 blocks.
Feb 15 16:35:42 swi-mdm9x15 user.debug Legato: DBUG | UNKNOWN[1765]/framework T=main | LE_FILENAME InitPool() 303 | Memory pool name ‘framework.hashMap_refle_mdc_ClientHandler’ is truncated to 'framework.hashMap_refle_mdc_Cli’
Feb 15 16:35:42 swi-mdm9x15 user.debug Legato: DBUG | UNKNOWN[1765]/framework T=main | LE_FILENAME msgMessage_CreatePool() 112 | Pool name truncated to ‘msgs-f51d46d0916e8217f8268ebd7f’ for protocol ‘f51d46d0916e8217f8268ebd7f42baa0’.
Feb 15 16:35:42 swi-mdm9x15 user.debug Legato: DBUG | UNKNOWN[1765]/framework T=main | LE_FILENAME InitPool() 303 | Memory pool name ‘framework.msgs-f51d46d0916e8217f8268ebd7f’ is truncated to 'framework.msgs-f51d46d0916e8217’
Feb 15 16:35:42 swi-mdm9x15 user.debug Legato: DBUG | UNKNOWN[1765]/framework T=main | LE_FILENAME le_mem_ForceAlloc() 841 | Memory pool ‘.le_mdc_ClientThreadData’ overflowed. Expanded to 1 blocks.
Feb 15 16:35:42 swi-mdm9x15 user.debug Legato: DBUG | UNKNOWN[1765]/framework T=main | le_mdc_client.c DoConnectService() 391 | ======= Starting client for ‘cm.cm.le_mdc’ service ========
Feb 15 16:35:42 swi-mdm9x15 user.debug Legato: DBUG | UNKNOWN[1765]/framework T=main | LE_FILENAME le_mem_ForceAlloc() 841 | Memory pool ‘framework.SafeRef-Map’ overflowed. Expanded to 12 blocks.
Feb 15 16:35:42 swi-mdm9x15 user.debug Legato: DBUG | UNKNOWN[1765]/framework T=main | LE_FILENAME InitPool() 303 | Memory pool name ‘framework.hashMap_refle_sim_ClientHandler’ is truncated to 'framework.hashMap_refle_sim_Cli’
Feb 15 16:35:42 swi-mdm9x15 user.debug Legato: DBUG | UNKNOWN[1765]/framework T=main | LE_FILENAME msgMessage_CreatePool() 112 | Pool name truncated to ‘msgs-5003e8cf806c2137854dd150a6’ for protocol ‘5003e8cf806c2137854dd150a6a8b2ff’.
Feb 15 16:35:42 swi-mdm9x15 user.debug Legato: DBUG | UNKNOWN[1765]/framework T=main | LE_FILENAME InitPool() 303 | Memory pool name ‘framework.msgs-5003e8cf806c2137854dd150a6’ is truncated to 'framework.msgs-5003e8cf806c2137’
Feb 15 16:35:42 swi-mdm9x15 user.debug Legato: DBUG | UNKNOWN[1765]/framework T=main | LE_FILENAME le_mem_ForceAlloc() 841 | Memory pool ‘.le_sim_ClientThreadData’ overflowed. Expanded to 1 blocks.
Feb 15 16:35:42 swi-mdm9x15 user.debug Legato: DBUG | UNKNOWN[1765]/framework T=main | le_sim_client.c DoConnectService() 391 | ======= Starting client for ‘cm.cm.le_sim’ service ========
Feb 15 16:35:42 swi-mdm9x15 user.debug Legato: DBUG | UNKNOWN[1765]/framework T=main | LE_FILENAME le_mem_ForceAlloc() 841 | Memory pool ‘framework.SafeRef-Map’ overflowed. Expanded to 13 blocks.
Feb 15 16:35:56 swi-mdm9x15 user.debug Legato: DBUG | UNKNOWN[1953]/framework T=main | LE_FILENAME le_mem_ForceAlloc() 841 | Memory pool ‘framework.FdMonitor’ overflowed. Expanded to 11 blocks.
Feb 15 16:35:56 swi-mdm9x15 user.debug Legato: DBUG | UNKNOWN[1953]/framework T=main | LE_FILENAME le_mem_ForceAlloc() 841 | Memory pool ‘framework.hashMap_refFdMonitors’ overflowed. Expanded to 12 blocks.
Feb 15 16:35:56 swi-mdm9x15 user.debug Legato: DBUG | UNKNOWN[1953]/framework T=main | LE_FILENAME le_mem_ForceAlloc() 841 | Memory pool ‘.le_cellnet_ClientThreadData’ overflowed. Expanded to 1 blocks.
Feb 15 16:35:56 swi-mdm9x15 user.debug Legato: DBUG | UNKNOWN[1953]/framework T=main | le_cellnet_client.c DoConnectService() 391 | ======= Starting client for ‘cm.cm.le_cellnet’ service ========
Feb 15 16:35:56 swi-mdm9x15 user.debug Legato: DBUG | cm[1953]/framework T=main | LE_FILENAME le_mem_ForceAlloc() 841 | Memory pool ‘framework.Protocol’ overflowed. Expanded to 12 blocks.
Feb 15 16:35:56 swi-mdm9x15 user.debug Legato: DBUG | cm[1953]/framework T=main | LE_FILENAME InitPool() 303 | Memory pool name ‘framework.msgs-LogControlProtocol’ is truncated to 'framework.msgs-LogControlProtoc’
Feb 15 16:35:56 swi-mdm9x15 user.debug Legato: DBUG | cm[1953]/framework T=main | LE_FILENAME le_mem_ForceAlloc() 841 | Memory pool ‘framework.Session’ overflowed. Expanded to 12 blocks.
Feb 15 16:35:56 swi-mdm9x15 user.debug Legato: DBUG | cm[1953]/framework T=main | LE_FILENAME le_mem_ForceAlloc() 841 | Memory pool ‘framework.FdMonitor’ overflowed. Expanded to 12 blocks.
Feb 15 16:35:56 swi-mdm9x15 user.debug Legato: DBUG | cm[1953]/cm_exe T=main | _main.c main() 67 | == Starting Event Processing Loop ==
Feb 15 16:35:56 swi-mdm9x15 user.debug Legato: DBUG | cm[1953]/framework T=main | LE_FILENAME le_mem_ForceAlloc() 841 | Memory pool ‘framework.SafeRef-Map’ overflowed. Expanded to 20 blocks.
Feb 15 16:35:56 swi-mdm9x15 user.debug Legato: DBUG | cm[1953]/framework T=main | LE_FILENAME InitPool() 303 | Memory pool name ‘framework.hashMap_refle_data_ClientHandle’ is truncated to 'framework.hashMap_refle_data_Cl’
Feb 15 16:35:56 swi-mdm9x15 user.debug Legato: DBUG | cm[1953]/framework T=main | LE_FILENAME le_mem_ForceAlloc() 841 | Memory pool ‘framework.Protocol’ overflowed. Expanded to 13 blocks.
Feb 15 16:35:56 swi-mdm9x15 user.debug Legato: DBUG | cm[1953]/framework T=main | LE_FILENAME msgMessage_CreatePool() 112 | Pool name truncated to ‘msgs-8d7a449d97fb39a21739605a94’ for protocol ‘8d7a449d97fb39a21739605a943cac04’.
Feb 15 16:35:56 swi-mdm9x15 user.debug Legato: DBUG | cm[1953]/framework T=main | LE_FILENAME InitPool() 303 | Memory pool name ‘framework.msgs-8d7a449d97fb39a21739605a94’ is truncated to 'framework.msgs-8d7a449d97fb39a2’
Feb 15 16:35:56 swi-mdm9x15 user.debug Legato: DBUG | cm[1953]/framework T=main | LE_FILENAME le_mem_ForceAlloc() 841 | Memory pool ‘framework.Session’ overflowed. Expanded to 13 blocks.
Feb 15 16:35:56 swi-mdm9x15 user.debug Legato: DBUG | cm[1953]/framework T=main | LE_FILENAME le_mem_ForceAlloc() 841 | Memory pool ‘framework.FdMonitor’ overflowed. Expanded to 13 blocks.
Feb 15 16:35:56 swi-mdm9x15 user.debug Legato: DBUG | cm[1953]/framework T=main | LE_FILENAME le_mem_ForceAlloc() 841 | Memory pool ‘framework.hashMap_refFdMonitors’ overflowed. Expanded to 14 blocks.
Feb 15 16:35:56 swi-mdm9x15 user.debug Legato: DBUG | cm[1953]/framework T=main | LE_FILENAME le_mem_ForceAlloc() 841 | Memory pool ‘.le_data_ClientThreadData’ overflowed. Expanded to 1 blocks.
Feb 15 16:35:56 swi-mdm9x15 user.debug Legato: DBUG | cm[1953]/framework T=main | le_data_client.c DoConnectService() 391 | ======= Starting client for ‘cm.cm.le_data’ service ========
Feb 15 16:35:56 swi-mdm9x15 user.debug Legato: DBUG | cm[1953]/framework T=main | LE_FILENAME le_mem_ForceAlloc() 841 | Memory pool ‘.le_data_ClientData’ overflowed. Expanded to 1 blocks.
Feb 15 16:35:56 swi-mdm9x15 user.debug Legato: DBUG | cm[1953]/framework T=main | le_data_client.c le_data_AddConnectionStateHandler() 615 | Sending message to server and waiting for response : 4 bytes sent
Feb 15 16:35:56 swi-mdm9x15 user.debug Legato: DBUG | cm[1953]/framework T=main | le_data_client.c le_data_Request() 745 | Sending message to server and waiting for response : 0 bytes sent
Feb 15 16:35:57 swi-mdm9x15 daemon.info dnsmasq[800]: exiting on receipt of SIGTERM
Feb 15 16:35:57 swi-mdm9x15 daemon.info dnsmasq[1992]: started, version 2.71 cachesize 150
Feb 15 16:35:57 swi-mdm9x15 daemon.info dnsmasq[1992]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack ipset auth no-DNSSEC
Feb 15 16:35:57 swi-mdm9x15 daemon.info dnsmasq-dhcp[1992]: DHCP, IP range 192.168.10.10 – 192.168.10.199, lease time 1d
Feb 15 16:35:57 swi-mdm9x15 daemon.info dnsmasq-dhcp[1992]: DHCP, IP range 192.168.20.10 – 192.168.20.100, lease time 1d
Feb 15 16:35:57 swi-mdm9x15 daemon.info dnsmasq-dhcp[1992]: DHCP, IP range 192.168.2.3 – 192.168.2.3, lease time 12h
Feb 15 16:35:57 swi-mdm9x15 user.info Legato: INFO | supervisor[468]/supervisor T=main | supervisor.c SigChildHandler() 677 | Reaping unconfigured child process 1991.
Feb 15 16:35:57 swi-mdm9x15 daemon.info dnsmasq[1992]: using nameserver 8.8.8.8#53
Feb 15 16:35:57 swi-mdm9x15 daemon.info dnsmasq[1992]: reading /etc/resolv.conf
Feb 15 16:35:57 swi-mdm9x15 daemon.info dnsmasq[1992]: using nameserver 8.8.8.8#53
Feb 15 16:35:57 swi-mdm9x15 daemon.info dnsmasq[1992]: using nameserver 172.26.38.1#53
Feb 15 16:35:57 swi-mdm9x15 daemon.info dnsmasq[1992]: using nameserver 8.8.8.8#53
Feb 15 16:35:57 swi-mdm9x15 daemon.info dnsmasq[1992]: using nameserver 8.8.4.4#53
Feb 15 16:35:57 swi-mdm9x15 daemon.info dnsmasq[1992]: read /etc/hosts - 1 addresses
Feb 15 16:35:58 swi-mdm9x15 user.info Legato: INFO | supervisor[468]/supervisor T=main | supervisor.c SigChildHandler() 677 | Reaping unconfigured child process 1996.
Feb 15 16:36:00 swi-mdm9x15 user.info Legato: INFO | supervisor[468]/supervisor T=main | supervisor.c SigChildHandler() 677 | Reaping unconfigured child process 2007.
Feb 15 16:36:02 swi-mdm9x15 user.info Legato: INFO | supervisor[468]/supervisor T=main | supervisor.c SigChildHandler() 677 | Reaping unconfigured child process 2009.

These last messages :

Feb 15 16:36:10 swi-mdm9x15 user.info Legato: INFO | supervisor[468]/supervisor T=main | supervisor.c SigChildHandler() 677 | Reaping unconfigured child process 2027.

Are posting twice a second with ever-increasing child pids. It started at 1996 on my first attempt to use wifi ap, and it has been continuing for the last 10 minutes up to the 9000s range. This is on the WP85 and WP75. What could be going so wrong with wifi ap start and wifiWebAp?


#23

I also tried /sbin/ifup wlan0:

root@swi-mdm9x15:~# /sbin/ifup wlan0
Failed to start TI wifi
root@swi-mdm9x15:~# dmesg -c
root@swi-mdm9x15:~#

I copied the tiwifi that you sent me back from the board in /etc/init.d/tiwifi to the vm back to my mac just to be 100% sure that it was correct:
tiwifi (8.0 KB)


#24

This is all on Mangoh Reds by the way. It all works on the mangoh Green.


#25

Well, we should do a 30 minutes google hangout next week to walk you through what we did.


#26

@asyal,

I can do it tomorrow, Monday or Tuesday. We hope to be able to demo some functionality on Wednesday. If any of those dates work please let me know. I’m sure we will be able to figure out the issue!

Thanks again for working this through with us.


#27

alright, lets do o this on Monday at 10:00am PST. We will walk you through a WP76 using Ti Wi IoT card and also walk you through setting Mediatek WiFi on mangOH Red.

Everyone is welcome to join.


#28

So 1pm EST. Thank you very much, can’t wait to sort this out!


#29

FYI, we’ll be using a WP76 module for this hangout.


#30

@asyal,

Is the wifi solution possible on the WP7502? We are bringing our board out of the country so we can’t use our WP76


#31

@rauger1: Using the wifi IoT card on the mangOH Red with a wp75 should be possible. I think if you follow along in the hangout you will be able to get it working.